Meca Cup1 Simulator Racing Pedals - 2 Pedal Set

Equipped with 200kg Loadcell Sensor

WAS $1,149.00
RRP $1,149.00
NOW $1,140.00
SAVE 1%!
Sale Ends in
00:00 am, 31 March 2022

Item Number: MECACUP1-2

In Stock
New Stock In!

Have Questions? Contact Us Here

Calculate Shipping

Minimum Order Quantity 1

The material used for the manufacture of the pedals is 3mm thick stainless steel. Stainless steel class 1.4301.

Swivel and sliding bearings are made from bronze sliding segments, unibals on rods are used from the Automotive environment (stainless steel, aluminum, brass).
The rods are made of stainless steel logs with lathed threads. Each of the three pedals are equipped with a Loadcell sensor. The brake pedal is equipped with the 200kg sensor.

Electronic sensors

Leo Bodnar, 16 bit. PC connection via USB cable,Plug and Play.
Calibration via DIVIEW software, leobodnar.com

The baseplate is made out of 8mm thick metal sheet which is powder-coated. Attachment to the rig is through prepared holes, as per established manufacturers. The grooves allow pedal positioning. The stainless steel parts are laser cutted with a CNC laser. Pedals are treated with ballotina (shot-peening).
Lathed parts: bronze mounting of each pedal, stainless threaded beams, Alu. brake segments, bronze throttle pedal stops.

3D print

Material PETG, electronics boxes, delimitation between unibals in the pedal lever, gas spring preload.

Screws and all connection materials

Stainless steel type A2.

THROTTLE pedal

  • Stainless steel construction
  • Bronze slide bearings
  • Loadcell sensor
  • Board for signal conversion from loadcell (analog-digital)

Very strong construction, no unwanted movements or squeaks.
Excellent response to foot with adjustable personal preferences.

Made to last through the usage of loadcells, quality materials, electronics, and bronze lathed components.

The pedal can be tilted forwards by loosening the rear screws in the round groove in the rear of the pedal. The grooves allow the pedal to tilt by 18°.

The pedal height can be adjusted at the front part or by moving the remote posts in the rear. The shape and length of the pedal are adapted for the Heel and Toe technique.

The stiffness of the pedal can be also adjusted by moving the unibal in the groove of the pedal lever (main stiffness setting) and fine-tune the stiffness with the locking wheel that pre-tensions the spring.

The pedal surface is treated with ballotin (glass blasting), which increases the adhesion.

BRAKE pedal

  • Stainless steel
  • Loadcell sensor 200Kg
  • Bronze slide bearings
  • Aluminum brake segments
  • Three different hardness of replaceable polyurethanes
  • The pedal can be adjusted both in height and longitude

Very strong construction, no unwanted movements or squeaks.
Excellent response to foot with adjustable personal preferences.

Made to last through the usage of loadcells, quality materials, electronics, and bronze lathed components.

The pedal can be tilted forwards by loosening the rear screws in the round groove in the rear of the pedal. The grooves allow the pedal to tilt by 18°.

The pedal height can be adjusted at the front part or by moving the remote posts in the rear. The shape and length of the pedal is adapted for the Heel and Toe technique.

The pedal surface is treated with ballotin (glass blasting), which increases the adhesion.

Replaceable polyurethane rollers for pedal hardness adjustment

The package includes rollers of three levels of hardness: black – soft (mounted to the pedal), blue – middle, orange – hard. By exchanging and combining the rollers with different hardness levels you can alternate from a soft pedal with a certain travel to a pedal that is extremely stiff with minimal travel. Rollers can be also combined to enable different options. For example; black, blue, orange affects the linearity of stiffness when pressing the pedal.

Aluminum polyurethane stoppers

Each polyurethane is equipped with its own stopper (aluminum bowl). This ensures that each polyurethane is protected against its marginal limit load and further increases the modularity of the entire system. Explanation: Polyurethane rollers can be loaded until their weight load limit. Once the limit is breached the rollers become kegs and the attached sensors are no longer capable of reading the force applied to the pedal as the force is expelled out of the axis. This results in excessive deformation, feeling of unpleasant pedal drop, and in particular in a reduction in the life expectancy of the roller.

Another important benefit occurs when the stoppers connect when fully pressing the brake pedal simulating an entire pressurized brake system with no more pedal movement. This leads to a hard brake pedal resulting in a very similar feeling to breaking in a real car.

Stoppers, therefore, prevent excessive deformation, significantly extend the lifespan of the polyurethanes, and contributes to an overall better braking feeling.

Strong construction, easily replaceable polyurethane rollers, the excellent feeling when breaking, quality 100Kg Loadcell.

WHAT'S INCLUDED

  • THROTTLE pedal with loadcell sensor
  • BRAKE pedal with loadcell sensor 200kg
  • Replaceable polyurethane rollers for pedal hardness adjustment
  • Electronic, USB cable
  • Aluminum spacers
  • 8x screw – M6 x 20
  • 8x nut -M6
  • 8x underlay – 6mm
  • GT faceplate with grip

 

SKU MECACUP1-2
Barcode # 3362934111465
Brand MECA Sim Hardware
Shipping Weight 17.0000kg
Shipping Width 0.410m
Shipping Height 0.260m
Shipping Length 0.250m
Shipping Cubic 0.026650000m3
Meca Cup1 Simulator Racing Pedals - 2 Pedal Set has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other Masten Enterprises Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review