Australian Stocked Simucube 2 Ultimate R2 Direct Drive Wheel Base from Trak Racer

GST INC. 32 Nm peak torque

WAS $4,798.00
RRP $4,799.00
NOW $4,700.00
SAVE 2%!
Sale Ends in
00:00 am, 30 April 2022

Item Number: SC2ULT

In Stock

Passionately designed for eSports, Technology and Motorsports enthusiasts Simucube 2 Ultimate wheel base’s 32 Nm of torque is enough to give you deep immersion with any track, car, and condition. With Pro, one might forget they are in a simulation.

Have Questions? Contact Us Here

Calculate Shipping

Minimum Order Quantity 1

Shipped from Melbourne, Australia

Local Warranty, No Import Hassles and No Import Taxes - GST Included 

 

SC2 Ultimate | Direct Drive Force Feedback PC compatible Sim Racing wheelbase

32 Nm Torque
24-bit sensor
60-month local warranty

SC2 Ultimate | Direct Drive Force Feedback PC compatible Sim Racing wheelbase

The best possible Direct Drive wheelbase designed for professional racers, racing teams and race car drivers has an abundant 32 Nm of torque and the maxed-out torque response rate is at your disposal at any time and anywhere. Simucube 2 Ultimate wheelbase is based on Austrian-made maximally dynamic industrial motor optimized for racing simulation. It’s equipped with a 24-bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in racing simulators.

Ultimate exclusively comes with advanced fine-tunable signal processing to make the experience as personalized and authentic as humanly possible. This model was designed with a “only the best is good enough” mindset to give you the ultimate competitive advantage.

Simucube Ultimate is our tribute to the Ultimate drivers.

Includes: SC2 Ultimate wheelbase, power supply, cables, AU-power cable, premium torque off button, fixings for wheelbase, Simucube Quick Release Wheel Side Kit, pin for Simucube Quick Release

Full metal construction
The body of Simucube 2 is built from precision machined solid metal parts. It’s pretty hard to find a plastic piece in it – pretty much the only non-metallic one is the antenna for the Wireless Wheel Receiver.

Direct Drive brushless torque motor
The motor is an extraordinary one. Simucube developer team compared over 40 motors, hand-tested over ten of them, picked the best three motors, and finally customized them to suit flawlessly in direct drive racing simulation. SC2’s latest generation motor technology delivers unforeseen torque response rate and clarity. FEM optimized motor magnetic design yields practically zero torque ripple and magnetic cogging. Simucube 2 ‘s are also individually tested and verified to exceed inhumanly tight tolerances in production.

Dual CPU architecture
To unleash the full potential of the glorious motor and to process signals at maximum precision, Simucube 2 has been given a dedicated 216 MHz real-time processor in addition to a dedicated 144 MHz PC USB interface CPU. Unique dual CPU architecture ensures zero impact on ultra-low latency performance even when all processing and simulator actions are running simultaneously. The new 216 MHz processor features superscalar ARM architecture, making it effectively four times faster than the 72 MHz processors of IONI drive in Simucube 1.

Oversized rugged power components
All Simucube 2’s electronics have been designed in Finland by Granite Devices. The team that is also known for their reliable industrial motor drives. Simucube is built with the same uncompromising industrial quality principles. This means prioritizing ruggedness and longevity over the cost of the components. Simucube 2 power MOSFETs are rated over 2X their actual need to make them virtually immortal.

Robotics grade angle sensor
Simucube 2 Pro Direct Driver motor comes equipped with precision industrial robotics grade angle sensors with a resolution of 4 Million steps per revolution. The quality of the angle sensor information has paramount importance when calculating natural physics effects and filters. Any imperfection of the sensor signal would feel like a distortion in reality. All Simucube 2’s signal processing units are optimized to take full advantage of the unmatched sensor precision.

Isolated surge-protected USB
No Simucube driver shall ever become the victim of an interference-prone USB connection. Thanks to a galvanic isolation layer between the USB and power electronics. This also protects the PC from current spikes. Also, all connectors found on the back of Simucube 2 are ESD protected, exceeding the industrial requirements

Passive Cooling
Thanks to high-efficiency direct-drive operation optimized motors and clever electronics heat guiding; there is no dust collecting nor noisy fans in Simucube 2. A High-efficiency motor puts out less heat and consumes less power.

Remote Torque off button
Because high torque may pose a hazard if the simulator software goes nuts or if the driver becomes careless with the high torque wheel, every SC2 comes with an externally mountable Torque-off button. Optionally the button box may be upgraded to a stylish all-metal version with an additional external power switch.

TORQUE RECONSTRUCTION PROCESSING
Bypassing the simulator's sometimes coarse digitally sampled force commands through Simucube’s world-famous force reconstruction engine, the driver will be able to feel the force feedback like it was intended by the simulator's physics engine.

ADJUSTABLE TORQUE SLEW RATE LIMIT
Limits the rate of change in motor torque measured in Newton-meters per millisecond. May be used to adapt sharpness to the fast torque spikes to the driver’s preference. The maximum settable slew rate depends on the DD motor (see the comparison table for details).

NATURAL DAMPING, INERTIA AND FRICTION FILTERS
In addition to simulator-controlled damping, inertia, and friction effects, Simucube 2 implements real-time physics modeling based on user-controllable versions of them. Thanks to a high precision angle sensor in all Simucube 2 modes, these feel practically indistinguishable from real physical phenomena.

ADVANCED FILTER PARAMETERS (ULTIMATE ONLY)
Simucube 2 Ultimate adds more detailed tuning parameters to many of the listed signal processing methods and filters. Adjustable parameters include defining the frequency bandwidth of the signal processing allowing drivers to fine-tune the ultimate optimum setting for their rig and simulator. Ultimate drivers also have access to early access features and filters from the SC developer team.

COMPARE MODELS

 

SIMUCUBE 2 SPORT

SIMUCUBE 2 PRO

SIMUCUBE 2 ULTIMATE

MOTOR

Direct Drive optimized ultra low torque ripple motor

High response speed Direct Drive optimized ultra low torque ripple motor

Maximum response speed, low inertia, Direct Drive optimized ultra low torque ripple motor

SIMUCUBE WIRELESS WHEEL™ SUPPORT

Included

Included

Included

SIMUCUBE QUICK RELEASE™

Not Included

Not  Included

Included

MAX TORQUE *

17 Nm

25 Nm

32 Nm

MAX TORQUE SLEW RATE

4.8 Nm/ms

8.0 Nm/ms

9.5 Nm/ms

ANGLE SENSOR

22 bit absolute

22 bit absolute

24 bit Hiperface

TORQUE OFF BUTTON

Standard (Premium optional)

Standard (Premium optional)

Premium (with remote power switch)

POWER SUPPLY

280 W

R2 1 x 450 W Peak    

1000 W

WHEEL BASE DIMENSIONS INCL. SQR™

130 x 130 x 250 mm

130 x 130 x 270 mm

115 x 115 x 310 mm

MOUNTING HOLES

M8 x 4 pcs threaded hole

M8 x 4 pcs threaded hole

9 mm dia x 4 pcs through hole

MOUNTING HOLE PATTERN DIA

145 mm

145 mm

130 mm

FLANGE CENTERING HOLE DIA

110 mm

110 mm

110 mm

WHEEL BASE WEIGHT

8.0 kg

11.1 kg

11.3 kg

STANDARD WARRANTY

24 months

24 months

60 months

 

     

*) Torque is continuous until motor gets very hot. In preliminary testing, no-one has managed to cause torque to start throttling.

 

SIMUCUBE 2 SPORT

SIMUCUBE 2 PRO

SIMUCUBE 2 ULTIMATE

TORQUE RECONSTRUCTION PROCESSING

Yes

Yes

Yes

STATIC FORCE REDUCTION

Yes

Yes

Yes, in detail adjustable

NATURAL DAMPING, INERTIA AND FRICTION FILTERS

Yes

Yes

Yes, in detail adjustable

ULTRA LOW LATENCY MODE

Yes

Yes

Yes

TORQUE SLEW RATE ADJUSTMENT

1 – 4.8 Nm/ms

1 – 8.0 Nm/ms

1 – 9.5 Nm/ms

 

SKU SC2ULT
Barcode # 3362934111465
Brand SIMUCUBE
Shipping Weight 18.0000kg
Shipping Width 0.240m
Shipping Height 0.440m
Shipping Length 0.370m
Shipping Cubic 0.039072000m3
Australian Stocked Simucube 2 Ultimate R2 Direct Drive Wheel Base from Trak Racer has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other Masten Enterprises Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review